any got a 4ze1 dizzy forsale
Posted: Thu Feb 23, 2006 5:30 pm
???
Welcome to IsuzuPiazza.com :: Uniting Isuzu/ Holden Piazza Enthusiasts since 2002
Uniting Holden / Isuzu Piazza Enthusiasts
https://www.isuzupiazza.com/forum/
any got a 4ze1 dizzy forsale
Page 1 of 1
Posted: Thu Feb 23, 2006 5:33 pm
will need coil and ignitor too! thnks
Posted: Thu Feb 23, 2006 5:34 pm
sorry dont need coil and igniter my mistake 
Posted: Fri Feb 24, 2006 12:33 pm
Keep an eye on ebay the pop up every now and again.
Bob.
Bob.
Posted: Mon Feb 27, 2006 4:14 pm
thanks for the tip
Posted: Tue Feb 28, 2006 1:51 am
Ive got another tip, the plug off a VL/Skyline RB30 distributor is the same as the photoelectric 2.6L dizzy, it plugs right on. Ditto for the Throttle Position Switches connector. Not sure on the AFS as i didnt have on with me to check on the weekend. I found out by accident, i had the motor loaded up in the ute that i was swappin for the latest Piazza i got, i just happened to park next to my Uncles spare parts VL. I got nosey.
Yeah so dont stress if you dont get the plug and wiring with the Dizzy.
Actually that poses a question, youd think the CA20 would have the same plugs as the RB30 both being nissan, i wounder if you pluged in a 4ZE1 to a CA20 computer would it fire???? Is the CA18 the same wiring plugs as a CA20?? If so the loom for an after market ECU for a CA18DET would plug straight in. Or an after market loom for an RB30 minus two injectors.
Cheers. Bob.
Yeah so dont stress if you dont get the plug and wiring with the Dizzy.
Actually that poses a question, youd think the CA20 would have the same plugs as the RB30 both being nissan, i wounder if you pluged in a 4ZE1 to a CA20 computer would it fire???? Is the CA18 the same wiring plugs as a CA20?? If so the loom for an after market ECU for a CA18DET would plug straight in. Or an after market loom for an RB30 minus two injectors.
Cheers. Bob.