any got a 4ze1 dizzy forsale

mcmuthafart · Post by **mcmuthafart** » Thu Feb 23, 2006 5:33 pm

will need coil and ignitor too! thnks

mcmuthafart · Post by **mcmuthafart** » Thu Feb 23, 2006 5:34 pm

sorry dont need coil and igniter my mistake

Rodeobob · Post by **Rodeobob** » Fri Feb 24, 2006 12:33 pm

Keep an eye on ebay the pop up every now and again.

Bob.

mcmuthafart · Post by **mcmuthafart** » Mon Feb 27, 2006 4:14 pm

thanks for the tip

Rodeobob · Post by **Rodeobob** » Tue Feb 28, 2006 1:51 am

Ive got another tip, the plug off a VL/Skyline RB30 distributor is the same as the photoelectric 2.6L dizzy, it plugs right on. Ditto for the Throttle Position Switches connector. Not sure on the AFS as i didnt have on with me to check on the weekend. I found out by accident, i had the motor loaded up in the ute that i was swappin for the latest Piazza i got, i just happened to park next to my Uncles spare parts VL. I got nosey.

Yeah so dont stress if you dont get the plug and wiring with the Dizzy.

Actually that poses a question, youd think the CA20 would have the same plugs as the RB30 both being nissan, i wounder if you pluged in a 4ZE1 to a CA20 computer would it fire???? Is the CA18 the same wiring plugs as a CA20?? If so the loom for an after market ECU for a CA18DET would plug straight in. Or an after market loom for an RB30 minus two injectors.

Cheers. Bob.